Strawberry Turtle Crochet Pattern (Free + 6 More Fruit Turtles to Make)

Somebody looked at a turtle and a strawberry and thought, why not both. I am very glad they did.
This is a little dusty pink turtle wearing a bright red strawberry as a shell. It has a leafy green top, white seed stitches, and a tiny embroidered smile. It sits on your palm at about 11.5 cm (4.5 inches) long.
I commissioned this pattern from the crocheter I work with, went through every step photo, and I am sharing the whole thing free. Further down you will find six more free fruit turtle patterns from other designers, for when one strawberry turns into a whole fruit bowl.
Quick Info
| Detail | What to Expect |
|---|---|
| Skill level | Intermediate (you need FLO and BLO, and you join parts while you crochet) |
| Finished size | About 11.5 cm (4.5 inches) long |
| Time | Roughly an afternoon, about 3 to 4 hours |
| Stitches used | MR, ch, sc, hdc, dc, inc, dec, sl st, FLO, BLO |
| Yarn | 4-ply milk cotton in red, green, dusty pink, black and white |
| Construction | Head, flippers and tail made first, then crocheted into the shell as you close the bottom |
The head, four flippers and tail are all joined with single crochet stitches while you work the bottom of the shell. There is no pinning six pieces and sewing them on one by one.
The only piece you sew is the green strawberry top. That is about two minutes of needle work.
What Makes This Strawberry Turtle Different
A lot of fruit turtles are a plain turtle with a red dome stuck on top. You get the color, but you do not really get the strawberry.
This one has a proper shell edge. The last round of the red shell is worked into the front loops, so it frills out into little bumps all the way around, like the edge of a real berry. The bottom shell is then worked into the back loops of that same round, which locks everything together in one seam.
The other thing I love is the leafy top. It is five little chain-and-stitch leaves made in a magic ring, plus a stem. It looks fiddly. It is honestly one of the quicker parts.
Materials

- 4-ply milk cotton yarn in:
- Red, for the strawberry shell
- Green, for the leafy top
- Dusty pink, for the head, flippers, tail and bottom shell
- Black, for the mouth
- White, for the eye highlights and the seeds
- 3.5 mm crochet hook
- 5 mm safety eyes (or small black beads)
- Fiberfill stuffing
- Stitch marker
- Tapestry needle
- Scissors
Milk cotton gives you crisp, tight stitches, which matters on the frilly shell edge. A fuzzy yarn would blur all those little bumps.
No milk cotton nearby? Any light DK or sport weight cotton works. Keep the hook small enough that the stuffing does not peek through the stitches.
Abbreviations
- MR = magic ring
- ch = chain
- sc = single crochet
- hdc = half double crochet
- dc = double crochet
- inc = increase (2 sc in the same stitch)
- dec = decrease (2 sc together)
- sl st = slip stitch
- FLO = front loop only
- BLO = back loop only
- R = round
- [18] = stitch count at the end of the round
This pattern uses US crochet terms. Work in a continuous spiral unless the pattern says otherwise, and move your stitch marker up every round.
Part 1: The Head

Start with dusty pink.
- R1: 6 sc in MR [6]
- R2: 6 inc [12]
- R3: (1 sc, 1 inc) x 6 [18]
- R4 to R6: sc around [18]
Tip: Pull the magic ring tight. This is the tip of the turtle’s nose. A loose ring leaves a little hole right at the front of the face.
Placing the Eyes
Put the safety eyes in now, between Rounds 3 and 4, about 7 stitches apart.
Tip: Test before you lock. Push both eyes through without the washers and look at the face from the front. If they look a bit too close or too wide, move one over a stitch. Once the washer is on, it is not coming off.
Wide-set eyes like these are what give the turtle that sweet, slightly sleepy look. Go much closer together and it starts to look surprised.
Stuff the head lightly. You want it round, not rock hard.
- R7: (1 sc, 1 dec) x 6 [12]
- R8: 6 dec [6]
Do not close the gap. Fasten off and weave in the end. The open bottom of the head is where it gets crocheted into the shell later.
Part 2: The Flippers and Tail

Flippers (Make 4)
Dusty pink again.
- R1: 8 sc in MR [8]
- R2 to R4: sc around [8]
Stuff lightly. A pinch of fiberfill is plenty.
Now fold the opening flat and work 4 sc across both sides together to close it. That flat, closed edge is what you will crochet into the shell later.
Fasten off and weave in the end. Make three more.
Tip: Keep all four the same. Line them up before you move on. If one is noticeably plumper, pull a little stuffing out now, because a lopsided flipper is very obvious once the turtle is sitting on a shelf.
Tail
- R1: 3 sc in MR [3]
- R2: 3 inc [6]
- R3 to R4: sc around [6]
Stuffing is optional on a piece this small.
- R5: fold the tail flat and sc across both sides [3]
Fasten off and weave in the end.
Part 3: The Strawberry Shell

Switch to red. This is the star of the show.
- R1: 6 sc in MR [6]
- R2: 6 inc [12]
- R3: (1 sc, 1 inc) x 6 [18]
- R4: (2 sc, 1 inc) x 6 [24]
- R5: (3 sc, 1 inc) x 6 [30]
- R6: sc around [30]
- R7: (4 sc, 1 inc) x 6 [36]
- R8: sc around [36]
You now have a shallow red dome.
The Frilly Shell Edge
- R9 (FLO): {sl st, (1 sc, 1 hdc, 1 sc) in the next stitch, sl st} x 12 [60]
Fasten off and weave in the end.
Tip: Front loop only means the front loop of Round 8. Work this whole round into the loops closest to you. The back loops stay free, and you will need them in Part 4.
Each repeat makes one little bump. Twelve bumps go all the way around, and that is the berry edge. If you end up with eleven or thirteen, count Round 8 again before you blame Round 9.
Part 4: Closing the Shell (and Attaching Everything)

Switch to dusty pink and join the yarn in the back loop of Round 8 of the red shell. Hold the shell upside down, so you are looking into the dome.
This next round attaches the head, all four flippers and the tail as you go. Here is how each join works:
- Hold the piece outside the shell, with its open or flattened edge lined up against the back loops.
- Insert your hook through the piece first, then through the back loop of the shell.
- Finish the single crochet as normal.
Tip: Head the right way up. The open bottom of the head goes against the shell, with the eyes facing outward and slightly up. Check this before you make the first stitch, because unpicking a head is not fun.

Round 1: The Placement Round
| Stitches | What You Are Doing |
|---|---|
| 1 sc | Shell only |
| 3 sc | Attach the head |
| 1 sc | Shell only |
| 4 sc | Attach front flipper 1 |
| 5 sc | Shell only |
| 4 sc | Attach back flipper 1 |
| 1 sc | Shell only |
| 3 sc | Attach the tail |
| 1 sc | Shell only |
| 4 sc | Attach back flipper 2 |
| 5 sc | Shell only |
| 4 sc | Attach front flipper 2 |
That adds up to 36 stitches, one in every back loop of Round 8.
The short gaps of 1 sc keep the head and tail tucked close to their neighbors. The long gaps of 5 sc are the turtle’s sides, which is why the front and back flippers end up nicely spread apart.
Shaping the Bottom
- R2: (2 sc, 1 dec, 2 sc) x 6 [30]
- R3: (3 sc, 1 dec) x 6 [24]
- R4: 12 dec [12]

Now stuff the shell. Push fiberfill right out to the edges so the frilly rim holds its shape.
Tip: Stuff it before Round 5, not after. Once you hit 6 stitches the opening is too small to get your fingers in. A soft, saggy shell is the most common reason a strawberry turtle looks flat in photos.
- R5: 6 dec [6]
Fasten off with a long tail. Thread it on the needle, weave it through the front loops only of the last 6 stitches, and pull tight to close. Push the needle into the body and out somewhere else, then trim, so the end hides inside.
Part 5: The Strawberry Top

Switch to green and make a magic ring.
Repeat this 5 times into the ring:
- ch 5, sc in the 2nd ch from the hook, 1 hdc, 1 dc, 1 dc, sl st into the MR
That gives you five leaves. Now the stem:
- ch 5, skip the 5th ch, sl st into each of the next 5 ch
Cut the yarn, leaving a long tail for sewing. Pull the tail through the middle of the ring with your needle, then sew the top onto the center of the red shell.
Tip: Pull the magic ring closed before you sew. A tight center makes the leaves fan out flat. A loose one lets them flop up like a dying plant.

From above you can see why the center matters. The five leaves should sit like a star right in the middle of the shell.
Part 6: The Face and the Seeds

This is where it stops being a red dome and becomes a strawberry.
The face:
- Embroider a small curved mouth with black yarn.
- Add a tiny white highlight next to each eye with white yarn. One short stitch is enough.
The seeds:
- Stitch short white lines scattered over the red shell.
Tip: Do not line the seeds up. Real strawberry seeds are a little random. Space them roughly evenly but vary the angle, and the shell instantly reads as a berry instead of a polka dot.
Tip: Hide your knots inside. Start each stitch from somewhere under the shell or under the leaves, so no knots sit on the surface.

And that is your strawberry turtle done.
Tips for Success
- Count Round 8 before Round 9. Everything after it, the shell edge and the placement round, assumes exactly 36 stitches.
- Lay out all the pieces before Part 4. Head, four flippers and a tail. It is much easier to fix a mismatched flipper now than after it is crocheted in.
- Keep your tension tight. Amigurumi wants firmer stitches than a blanket does. If you can see stuffing through the stitches, go down a hook size.
- Use cotton for the shell. It holds the frilly edge. Acrylic works, but the bumps come out softer and rounder.
- Do not worry about tiny wobbles. Handmade turtles are allowed to be slightly lopsided. As long as everything is firmly attached, it is perfect.

Turning It Into Other Fruits
Once you have made one, the shell is basically a blank canvas. The body, flippers and placement round never change. You only swap the shell colors and the details.
| Fruit | Shell Color | Swap the Details |
|---|---|---|
| Blueberry | Navy or dark blue | Skip the seeds. Replace the leafy top with a tiny five-point crown in the same blue. |
| Orange | Orange | Skip the seeds and the leaves. Add a short green stem and one leaf. |
| Lemon | Yellow | Skip the seeds. Add a small green stem and one leaf. |
| Cherry | Dark red | Skip the seeds. Use a longer stem with one leaf. |
I have not had these versions made yet, so treat the table as a starting point rather than a tested pattern. The stitch counts stay exactly the same either way.
If you want designers who have already worked these out properly, keep scrolling.

That blurry yellow one in the background is our sunflower turtle, which has its petals crocheted straight into the shell. It is the same idea as this pattern, only a flower instead of a fruit.
6 More Free Fruit Turtle Patterns
One strawberry turtle never stays one strawberry turtle. These are six free fruit turtle patterns from other indie designers, each with something this one does not have.
Every link below goes to the designer’s own page. The patterns on Ribblr are free but need a free Ribblr account to open.
1. Giant Chenille Strawberry Turtle by Craft Alotl

This is the cuddle-size version. It is made in super chunky chenille on a 10 mm hook and comes out around 28 cm long.
Instead of a leafy top, it has a white strawberry blossom sitting on the shell. If you want a strawberry turtle to hug rather than to put on a shelf, start here.
Get the free pattern on Red Ted Art
2. Low-Sew Fruit Turtles, 8 in 1 by knotgenius.crochet

One base turtle with changes for eight fruits: watermelon, lemon, orange, kiwi, strawberry, blueberry, dragon fruit and apple. It can also be made as a plain classic turtle.
The fins are crocheted in, so there is very little sewing. This is the one to pick if you want a whole fruit bowl from a single pattern.
Get the free pattern on Ribblr
3. 5-in-1 Fruit Turtles, Bundle 2 by SugarSTUDIO

Strawberry, blueberry, cherry, grape and apple, all on tiny white turtles. The designer says each one takes about 30 minutes, and it is rated beginner.
These are much smaller and quicker than ours. Good for market tables or a pocket full of gifts.
Get the free pattern on Ribblr
4. Watermelon Turtle by TansuluuCraftHaus

A beige turtle with a red, seeded watermelon shell and a green rim. It even comes with its own tiny watermelon slice to carry around.
It is rated easy, works up in cotton on a 2.5 mm hook, and finishes at about 14 cm long. That makes it the closest match to our strawberry turtle in size and yarn.
Get the free pattern on Crazy Patterns
5. Dragon Fruit Turtle by RayneyDayStitches

Lime green turtle, white seeded shell, hot pink rim. It is one of those color combos that should not work and absolutely does.
The designer describes it as a smaller, chunkier take on her other turtle pattern. It is rated intermediate.
Get the free pattern on Ribblr
6. Tartamora the Berry Turtle by Xululihs

A sage green turtle with a bumpy purple blackberry for a shell. The bumps are what sell it, and they are a nice next step once the strawberry shell feels easy.
The designer rates it advanced beginner to intermediate.
Get the free pattern on Ribblr
FAQ
Is the strawberry turtle beginner friendly?
The designer rates it intermediate. You need to be comfortable with the magic ring, increases and decreases, and front and back loops.
The trickiest part is the placement round in Part 4. If you have made one amigurumi before, the table above walks you through it. If this would be your first, the tiny pocket turtle is a gentler warm-up.
How big is the finished turtle?
About 11.5 cm (4.5 inches) long with 4-ply milk cotton and a 3.5 mm hook. Thicker yarn and a bigger hook make it bigger. Tighter tension makes it a touch smaller.
Can I make it in chenille or velvet yarn?
Yes, but everything grows. Go up to the hook size on your yarn label and use bigger safety eyes so they do not disappear on the head.
The frilly shell edge is softer in chenille and the seeds sink in a bit, so stitch them with a thicker white yarn.
Is it safe for a baby?
Safety eyes are a choking risk for children under 3. For a baby, embroider the eyes with black yarn instead, and check every flipper is firmly crocheted in.
Why does my shell edge look flat instead of frilly?
Usually Round 9 went into both loops instead of the front loop only. It can also happen if the shell is under-stuffed, so the rim has nothing to sit against.
Can I sew the parts on instead?
You can. Close the bottom shell first, then sew the head, flippers and tail on.
The crocheted-in method is just neater and sturdier. It is also how the photos were made, so the shapes will match better if you follow it.
Make Your Own Little Fruit Bowl
If you make a strawberry turtle, I would love to see it. Save this pattern to your amigurumi board on Pinterest so you can find it again when it is time for the next one.
For more shells with a twist, try the sunflower turtle or the Christmas tortoise in a Santa hat. And if you want a whole list of quick makes, my free amigurumi patterns roundup has ten small animals you can finish in a day.






